The new automatic coverslipper CVR909, the latest Bio-Optica creation characterized by the use of the most recent technologies, is able to guarantee:
Ease of use
Reproducible results
Perfect mounting without air bubbles
INTERFACE WITH ALL THE LIS SYSTEMS
It is possible to interface the instrument to your LIS in order to ensure the traceability system of the samples. The barcode saves the processed glass in a shared folder that can be interfaced with the management software chosen by the customer.
COVERSLIPPER FEATURES
The instrument is able to load continuously baskets with 30 slides capacity each. The coverslipper has been studied to ease the operator work, this is the
Reason why the coverglass loading station are 2 (one for use and one for back up), both with a capacity of 100 coverglasses each (200 in total without the intervention of the user). In addition, it is possible to load coverglasses of different dimensions:
24 x 40 mm
24 x 50 mm
24 x 60 mm
The substitution of the holders is rapid, so that the operator can adapt the instrument to his needs.
The coverslipper can work in “WET” or “DRY” mode.
As for the stainer, the coverslipper has an integrated aspiration system with active charcoal and it is possible to connect it to an external ventilation system.
The coverslipper has an integrated colour touch screen thanks to which it is possible to set different parameters and monitor different settings such as:
Acoustic and visible signals for beginning and end of cycle
Acoustic and visible signals in case of problems
Filtration system control
Mounted slides status control
Signalling of mistakes during slides mounting
Unique and exclusive exit system of mounted glass slides: Bio-optica instrument ALLOWS TO OBTAIN THE MOUNTED GLASS SLIDES DIRECTLY ON TRAYS IN HORIZONTAL POSITION, by avoiding a huge
time waste for the operators who will be able to bring the trays directly to the pathologist for the evaluation at the microscope.
Another important aspect is the mounting dispensing system.
It is possible to set, in a precise way, all the dispensing parameters:
Quantity
Speed
Slide off-set
In addition IT IS NOT NECESSARY TO SUBSTITUTE THE DISPENSING NEEDLE, since
the instrument is able to meet all operator’s needs.
To avoid the needle obstruction, AFTER EVERY MOUNTING, THE NEEDLE IS AUTOMATICALLY CLEANED TROUGH A SOLVENT WASH.
The mounting medium (500 ml bottle), is studied to be easily accessible, with rapid connections (level sensor included) which allows the operator to substitute the bottle without touching any wire.
As for the stainer, it is possible to set a password at one level.
